My 2006 330i was in dire need of some headlamp restoration. This could have easily been skipped if BMW didn't GLUE the stupid lenses on! Anywho, I ordered up some Optimum Opti-Lens Permanent Headlight Coating and today I got to work.
Tools:
Blue painters tape
1000 grit sandpaper
Porter Cable 7424XP
Poorboys SSR 2.5
Poorboys SSR 1
Orange buffing pad
White buffing pad
15% Isopropanol in a spray bottle
Optimum Opti-Lens Permanent Headlight Coating
Procedure:
Mask off the area with blue painters tape
First I cleaned the headlamps off with 15% IPA.
Then I went to town with the 1000 grit sandpaper (wet, of course)
Followed by Poorboys SSR 2.5 on Orange pad
Repeat above as necessary until abrasions are gone.
Final polish with Poorboys SSR 1 on White pad to finish it off.
One last clean with 15% IPA.
Then I applied the Opti-Lens coating somewhat-liberally.
Waited 3-5 minutes to "cure," then wiped off excess with included microfiber towel.
Before:
After!
If you really look, you can still see some imperfections. I didn't feel the need to wet-sand the lenses all day so I stopped when I felt like it. Now we shall wait and see how "permanent" this coating is!
Tools:
Blue painters tape
1000 grit sandpaper
Porter Cable 7424XP
Poorboys SSR 2.5
Poorboys SSR 1
Orange buffing pad
White buffing pad
15% Isopropanol in a spray bottle
Optimum Opti-Lens Permanent Headlight Coating
Procedure:
Mask off the area with blue painters tape
First I cleaned the headlamps off with 15% IPA.
Then I went to town with the 1000 grit sandpaper (wet, of course)
Followed by Poorboys SSR 2.5 on Orange pad
Repeat above as necessary until abrasions are gone.
Final polish with Poorboys SSR 1 on White pad to finish it off.
One last clean with 15% IPA.
Then I applied the Opti-Lens coating somewhat-liberally.
Waited 3-5 minutes to "cure," then wiped off excess with included microfiber towel.
Before:
After!
If you really look, you can still see some imperfections. I didn't feel the need to wet-sand the lenses all day so I stopped when I felt like it. Now we shall wait and see how "permanent" this coating is!
Aucun commentaire:
Enregistrer un commentaire