Retrofit xenon need help coding shutter for FRM 3 module?

hi

i have retrofitted bi xenon lci headlights to my e90 which originally had halogen lights, i brought a frm 3 xenon module and fitted this to the car. i have managed to get most features to work on the lights except the shutter to open and close when pulling the flash stalk. when i had my original frm module in the car the shutter was opening and closing when flashing but since i have put the frm 3 module in my car when pulling the flash stalk no shutter working.



i have read many threads on here before asking this but all that i have read havent worked for me. the xenon lines on my frm are the following:



XENON_AL_VERBAUT

aktiv

XENON_LI

wert_02

PWM_FL_BEI_BIXENON

wert_02

wert_03

BI_XENON_BEI_LH_3R

aktiv



i did try changing the bixenon line to both wert_01 as stated by another member but this still did not make the shutter work. when pulling the stalk the xenon bulb does light up so i am half way there just the shutter to make work?

does anyone know what line needs changing to make the shutter work on a frm3 module?

thanks in advance



i have also attached my full frm trc file.

Attached Files

FSW_PSW.txt (36.3 KB)